1 technical data sheet rp tnc male connector crimp/solder attachment for rg174, rg316, rg188 rp tnc male connector crimp/solder attachment for rg174, rg316, rg188 confguration connector tnc male reverse polarity connector specifcation mil-c-39012 connector interface type rg174,rg316,rg188 cable attachment method (shield/contact) crimp/solder body style straight electrical specifcations impedance, ohms 50 mechanical specifcations size length, in [mm] 1.23 [31.24] width/dia., in [mm] 0.59 [15] . weight, lbs [g] 0.034 [15.42] connector type tnc male reverse polarity contact material and plating brass, gold contact plating specifcation 3 in. minimum body material and plating brass, nickel body plating specifcation 70 in. minimum dielectric type t efon compliance certifcations (visit www.pasternack.com for current document) rohs compliant y es plotted and other data notes: v alues at 25 c, sea level rp tnc male connector crimp/solder attachment for rg174, rg316, rg188 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: rp tnc male connector crimp/solder attachment for rg174, rg316, rg188 PE4668 url: http://www.pasternack.com/tnc-male-reverse-polarity-rg174-rg316-rg188-connector-PE4668-p.aspx PE4668 PE4668 rev
? 2013 pasternack enterprises all rights reserved 2 PE4668 rev dwg title PE4668 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. fscm no. 53919 cad file 052902 scale n/a size a 127 assembly procedures contact: .068" hex crimp tool ferrule: .178" hex crimp tool crimp size required 1. strip cable as shown & slide ferrule (1) onto cable. 2. flare end of cable braid & slide metal spacer (2) & ptfe (3) spacer over cable dielectric. 3. the contact (4) should butt against the dielectric & ptfe spacer. crimp contact to cable center conductor. 4. install cable assembly into body so that the inner ferrule portion of body slides under braid. push cable assembly forward until contact snaps into place. slide ferrule over braid and up against connector body & crimp. rp tnc male connector crimp/solder attachment for rg174, rg316, rg188 PE4668 cad drawing
|
